Movement bases for 1/76th WW2 figures - part 3 making the bases

The day after preparing the figures I grabbed a bag of 2ps to get on with making the movement bases.  The first job was to mark out where the figures were to go.  I got one of my least favourite figures, postioned him centrally on a 2p and drew round him.  And repeated another 50 or so times.  I did this so when I painted the 2ps I would ensure leaving a gap where the magnet would be.

The next step was to form the movement bases.  Initially I went for three figure trays.  Ask any designer or gardener - things look best in threes.  I used a commercially bought 1p movement tray to get the general shape.  I did vary the angle of these as well as I didn't want them to be all the same.  The 2ps were initially joined by lengths of duct tape.  This is exceptionally strong and quite flexible but it's horrid to cut with scissors.  Once the bases were formed I cut away any excess tape with a sharp hobby knife.  

This forms the basic shape but it's a bit wobbly.  I therefore cut some small lengths (5mm x 8mm) of plastic card to stick across the 2ps.  Once superglued into place these really give some extra strength to them.

My initial batch was 6 bases just enough for a Panzer grenadier platoon.  The next step will be to add some paint and texture to them.  

Comments

  1. Jim Duncan Wargamer3 December 2021 at 17:09

    Hope you checked that all these pennies are magnetic. Some won't be.

    ReplyDelete
    Replies
    1. Dr Beard3 December 2021 at 18:16

      Yes Jim I found that out early on and spent a few hours sorting them out before starting making up the bases.

      Delete
    2. Jim Duncan Wargamer3 December 2021 at 19:11

      You do know that you can buy bases like these and they are a better finish.

      https://warbases.co.uk/product-category/movement-trays/2p-trays/

      Delete
    3. Dr Beard4 December 2021 at 15:42

      Yes in the first post I talk about this and why they're not suitable where I also mention about checking the 2ps. As to a better finish let's see how mine turn out.

      Delete

Post a Comment

Popular posts from this blog

City ruins scatter terrain

Image
2024 and 2025 will see the 80th anniversary of many of the great city battles of the Second World War, such as Warsaw, Budapest, Königsberg and Berlin to name but a few.  With this is mind I've been looking at my terrain collection.  My city terrain is centred around some marvellous 20mm MDF buildings I got from Commission Figurines at Salute back in 2014.  I built some rubble piles a few years ago, but when I got it all out of the loft it didn't look very impressive so I decided to make some more. The first job was to sort the base materials.  I used four different materials: cork board; 5mm foam board; old plywood bases and old credit cards.  The cork board and foam board are great materials for this type of terrain proving height, being relatively strong, easy to cut and very lightweight.  I started by pulling apart pieces of cork board to the rough sizes I wanted and then set about the pieces with a Stanley knife and an old screwdriver.  It's very easy to carve irregul
Read more

28mm Victrix Late-Roman Archers and Slingers

Image
When I first embarked on my Late-Roman project a year or so ago, I bought a few sample sprues from Gripping Beast, Wargames Atlantic and Victrix.  The Victrix one was from the Late Roman Archers and Slingers set.  The quality of these convinced me to choose Victrix for the project and I duly ordered up some sets.  After working my way slowly through these I finally went back to this original frame.  These are absolutely lovely models.  There's loads of variety and they go together beautifully.  The instruction sheet which I got from the Victrix website makes a massive difference in this regard.  I really enjoyed working on these.  They were quick to assemble and quick to paint up being in a uniform of sorts.   I only have the one frame, but I took a couple of the bodies from some of the Dark Age Archers that I was working on at the same time ( here ) and added some spare arms to make another pair of staff slingers.  This worked pretty well adding variety to the poses.  I'll do
Read more

More 28mm Victrix late-Romans

Image
As I assembled the forces for my first game using the late-Roman and Germanics that I've been working on for the last few months, I realised I needed a few more figures to make up the units.  I needed an extra pedes for each infantry unit and a leader for the missile troops.  I didn't have any more specific late-Romans left so I rooted through my other Victrix sprues. The bodies for the two spearmen came from a sprue I had from the Victrix Ancient Germans set.  Belt details aside, there's very little difference between the clothing across much of the ranges.  The hands holding the spear come from the Unarmoured Late-Romans set as do the heads.  I've got so many spare heads from that one pack I could outfit whole legions!  The shields are also from that set finished with Little Big Man transfers. I'm using Warlords of Erehwon to play with and each unit is usually a minimum of four strong with a leader figure.  I had four staff slingers and four archers but no leaders
Read more