Zombies!

It was during the first year of the pandemic that I started to build up a collection inspired by the Zona Alfa rules.  I've always liked the Post-Apocalyptic neo-Soviet look and these rules struck a chord with me.  So that I could use my existing terrain, I decided to do this project in 20mm using figures from the Elhiem Modern ranges.  Most of the figures are great but I've never been happy with the Zombies.  This year I found a seller on eBay knocking out sets of 12 individual figures split out from the Dark Alliance boxes.  It was worth a go so I ordered them.

There are 48 figures in a full box, 4 of each type.  I don't want any duplicates in my collection so even though it was more expensive per figure when compared to buying a full box, this worked well for me.  Generally I avoid soft plastic but persevered with these.  I did attempt to remove some of the flash and mould lines, but it was going to be a right bugger to do, so I left it on.  These are walking corpses what does it matter?  I soaked all the figures in washing up liquid and warm water and then when dry, I applied a watered down PVA mix.  I then primed them in Citadel Base Coat Black, stuck them on pennies like the rest of the collection and painted them as normal.  

Below you can see some lovely ladies.  Lots of character with the sculpts, I think I recognise some from the distant days of my youth😉

Next are the gents.  The sculptor was being very inclusive with these as we have some chunky zombies.  I particularly liked the guy in shirt and tie, his appearance and overall demeanour is like a lot of people I've had to work with over the years.  

Finally here are some little horrors.  Why is it that Zombie kids are creepiest of all?  

I liked these figures.  There's a lot of detail and character in the sculpts.  They're more slender than the metal Elhiem Zombies, but in my opinion a vast improvement.  Dark Alliance have a few more sets of interest so I'll have to keep my eyes peeled to see if I can pick up some more.  

Comments

Post a Comment

Popular posts from this blog

City ruins scatter terrain

Image
2024 and 2025 will see the 80th anniversary of many of the great city battles of the Second World War, such as Warsaw, Budapest, Königsberg and Berlin to name but a few.  With this is mind I've been looking at my terrain collection.  My city terrain is centred around some marvellous 20mm MDF buildings I got from Commission Figurines at Salute back in 2014.  I built some rubble piles a few years ago, but when I got it all out of the loft it didn't look very impressive so I decided to make some more. The first job was to sort the base materials.  I used four different materials: cork board; 5mm foam board; old plywood bases and old credit cards.  The cork board and foam board are great materials for this type of terrain proving height, being relatively strong, easy to cut and very lightweight.  I started by pulling apart pieces of cork board to the rough sizes I wanted and then set about the pieces with a Stanley knife and an old screwdriver.  It's very easy to carve irregul
Read more

28mm Victrix Late-Roman Archers and Slingers

Image
When I first embarked on my Late-Roman project a year or so ago, I bought a few sample sprues from Gripping Beast, Wargames Atlantic and Victrix.  The Victrix one was from the Late Roman Archers and Slingers set.  The quality of these convinced me to choose Victrix for the project and I duly ordered up some sets.  After working my way slowly through these I finally went back to this original frame.  These are absolutely lovely models.  There's loads of variety and they go together beautifully.  The instruction sheet which I got from the Victrix website makes a massive difference in this regard.  I really enjoyed working on these.  They were quick to assemble and quick to paint up being in a uniform of sorts.   I only have the one frame, but I took a couple of the bodies from some of the Dark Age Archers that I was working on at the same time ( here ) and added some spare arms to make another pair of staff slingers.  This worked pretty well adding variety to the poses.  I'll do
Read more

More 28mm Victrix late-Romans

Image
As I assembled the forces for my first game using the late-Roman and Germanics that I've been working on for the last few months, I realised I needed a few more figures to make up the units.  I needed an extra pedes for each infantry unit and a leader for the missile troops.  I didn't have any more specific late-Romans left so I rooted through my other Victrix sprues. The bodies for the two spearmen came from a sprue I had from the Victrix Ancient Germans set.  Belt details aside, there's very little difference between the clothing across much of the ranges.  The hands holding the spear come from the Unarmoured Late-Romans set as do the heads.  I've got so many spare heads from that one pack I could outfit whole legions!  The shields are also from that set finished with Little Big Man transfers. I'm using Warlords of Erehwon to play with and each unit is usually a minimum of four strong with a leader figure.  I had four staff slingers and four archers but no leaders
Read more