Chaos Dwarf Blunderbusses

Over the last month or so I've been working on two regiments of Chaos Dwarf Blunderbusses for Warmaster Revolution.  I finished the first regiment a couple of weeks ago intending to take some photos and post, but in the end I cracked on with the second regiment and did them all together.

These are all 10mm 3D printed figures bought from MGS Miniatures.  No real clean up required apart from the removal of some supports from the firing figures  You have to be very careful about this as it's easy to break the end off the blunderbuss as I found to my cost on the first few I did.  

They're primed and painted in acrylics my usual mix of Vallejo, Citadel and Army Painter.  One regiment was done in a red and green colour scheme as in the regimental colours of the French Foreign Legion.  I added in some gold as the third colour.  


The second regiment was painted with the Ancient Assyrians in mind and I used a blue, yellow and red  scheme.  The most time consuming part was trying to do variations on all the hats and pick out the details.    


As with the Axemen regiments the standards are designs from the White Dwarf Chaos Dwarf compilation.  I took the designs I wanted into Photoshop, reduced them right down and printed them on regular paper.  I then carefully cut each one out and stuck them on the standard with PVA.  Once dry I carefully painted the surrounding standard and blended the design in.  I think they look alright especially when on the table in a game.  

I've got one last regiment of Axemen to do for the Chaos Dwarf infantry.  Completing these and the Ogre Kingdoms army I started on will form one of my main projects for 2023.

Comments

Post a Comment

Popular posts from this blog

City ruins scatter terrain

Image
2024 and 2025 will see the 80th anniversary of many of the great city battles of the Second World War, such as Warsaw, Budapest, Königsberg and Berlin to name but a few.  With this is mind I've been looking at my terrain collection.  My city terrain is centred around some marvellous 20mm MDF buildings I got from Commission Figurines at Salute back in 2014.  I built some rubble piles a few years ago, but when I got it all out of the loft it didn't look very impressive so I decided to make some more. The first job was to sort the base materials.  I used four different materials: cork board; 5mm foam board; old plywood bases and old credit cards.  The cork board and foam board are great materials for this type of terrain proving height, being relatively strong, easy to cut and very lightweight.  I started by pulling apart pieces of cork board to the rough sizes I wanted and then set about the pieces with a Stanley knife and an old screwdriver.  It's very easy to carve irregul
Read more

28mm Victrix Late-Roman Archers and Slingers

Image
When I first embarked on my Late-Roman project a year or so ago, I bought a few sample sprues from Gripping Beast, Wargames Atlantic and Victrix.  The Victrix one was from the Late Roman Archers and Slingers set.  The quality of these convinced me to choose Victrix for the project and I duly ordered up some sets.  After working my way slowly through these I finally went back to this original frame.  These are absolutely lovely models.  There's loads of variety and they go together beautifully.  The instruction sheet which I got from the Victrix website makes a massive difference in this regard.  I really enjoyed working on these.  They were quick to assemble and quick to paint up being in a uniform of sorts.   I only have the one frame, but I took a couple of the bodies from some of the Dark Age Archers that I was working on at the same time ( here ) and added some spare arms to make another pair of staff slingers.  This worked pretty well adding variety to the poses.  I'll do
Read more

More 28mm Victrix late-Romans

Image
As I assembled the forces for my first game using the late-Roman and Germanics that I've been working on for the last few months, I realised I needed a few more figures to make up the units.  I needed an extra pedes for each infantry unit and a leader for the missile troops.  I didn't have any more specific late-Romans left so I rooted through my other Victrix sprues. The bodies for the two spearmen came from a sprue I had from the Victrix Ancient Germans set.  Belt details aside, there's very little difference between the clothing across much of the ranges.  The hands holding the spear come from the Unarmoured Late-Romans set as do the heads.  I've got so many spare heads from that one pack I could outfit whole legions!  The shields are also from that set finished with Little Big Man transfers. I'm using Warlords of Erehwon to play with and each unit is usually a minimum of four strong with a leader figure.  I had four staff slingers and four archers but no leaders
Read more